Trane Furnace Repair Nationwide

Trane Furnace Repair in Marietta: What to Know First

Independent Trane furnace repair in Marietta typically runs $150 – $700, and most Trane jobs we see are diagnosed within the first hour. We’re Brandt HVAC Co Marietta, and we work on every Trane furnace line still heating homes around Cobb County, from older XR80s to newer S9V2s. This page is for Trane owners who want straight answers on what breaks, what it costs, and who’s walking through the door. Call (478) 662-5175 and a live person answers, 24/7.

Call (478) 662-5175

How Trane Products Fail – and How We Fix Them

Trane builds a solid furnace, but every line has its known weak points. Here’s what we actually see in Marietta homes, by series:

• XR80 / XR90 (the workhorses): These older single-stage units dominate the neighborhoods west of Marietta Square. The most common failure we walk into is the hot surface ignitor cracking after years of heat cycling. Trane packaged these with a nitride ignitor that gets brittle. We replace it, verify the flame sensor is clean while we’re in there, and the furnace typically runs another few seasons. A real nuance: if the ignitor keeps failing every year or two, the board is sending too much voltage, not the ignitor’s fault.
• XV80 / XV95 (variable-speed era): The variable-speed blower motor module is the expensive failure here. Before recommending a $900+ replacement, we test the motor windings and the control module separately. Plenty of modules fail while the motor itself is still fine. That’s a $300 repair instead of a $900 one, and not every shop bothers to check.
• S9V2 / S9X2 (newer two-stage): We’re seeing pressure switch faults on the S9 line more than anything else now. It’s not usually the switch itself; it’s the condensate drain from the high-efficiency secondary heat exchanger plugging, which trips the pressure sensor as a false alarm. We clear the drain, test it, and leave you a clean trap. The factory fix is the same, but the switch gets replaced needlessly all the time.
• Heat exchanger concerns across all lines: Trane uses a crimped clamshell design that holds up well, but we’ve seen stress cracks near the burner on units that ran with a dirty filter for a long stretch. If we spot any suspicion on an older unit, we camera-scope the exchanger before we quote a repair. No one should pay to fix a cracked exchanger on a furnace that has outlived its value.
• Gas valve behavior: Trane’s two-stage gas valves on XV-era models occasionally refuse to stage up, meaning the furnace stays on low fire and can’t keep up on cold nights. Sometimes it’s the valve; sometime’s it’s a wiring harness issue at the molex plug. We pin down which before quoting, because the price difference between those two fixes is about $400.

Our Trane Furnace Repair Process

Here’s how a Trane repair runs with us, start to finish:

1. 1
   You call, a person answers. No phone tree, no “leave a message.” You describe what the furnace is doing, and we schedule a window that works for you.
2. 2
   You know who’s coming. Before the tech arrives, we send you their name and photo. They wear a Brandt uniform and show a photo ID at the door. That’s the Threshold Verified standard, and it’s non-negotiable for us. If anyone arrives who you weren’t told to expect, that visit is on us.
3. 3
   We diagnose in front of you. The tech walks through what they’re testing and why. We explain the difference between OEM Trane parts and quality aftermarket options, including what that means for your warranty. You get real info, not a sales script.
4. 4
   We give you a written price before any work starts. No exceptions, ever. The price you approve is the price you pay. If during the repair something else is discovered, we stop and get your sign-off on the new number before moving.
5. 5
   We fix it, test it, and clean up. We run the full sequence of operation, check combustion readings where applicable, and verify the furnace cycles correctly three or four times. Then we leave your utility closet cleaner than we found it.
6. 6
   You get a written guarantee. Every Trane repair is covered for 365 days. If the same repair fails within a year, we return at no charge. That’s the Done Right Promise, and we put it in writing.

What Trane Furnace Repair Costs in Marietta

Honest numbers, for planning purposes:

• Ignitor replacement: $150 – $300, parts and labor. We do this same-day.
• Flame sensor cleaning or replacement: $100 – $200. This is one of the cheapest fixes we do, and one of the most common.
• Gas valve repair or replacement: $300 – $550, depending on whether it’s single-stage or two-stage.
• Blower motor or module: $300 – $700, depending on what actually failed.
• Heat exchanger scope and diagnosis: $100 – $250 if you just want a definitive answer on whether the furnace is safe to keep running.

What moves the price? Part availability is the big one. Most Trane furnace parts are stocked locally in Marietta, but a variable-speed module can take a day to pull. Age matters too: an older Trane with obsolete parts may push towards the top of a range. Call (478) 662-5175 and we’ll give you a written price before any work starts.

Why Marietta Homeowners Call Brandt HVAC Co Marietta for Trane Work

Devin Marlowe, our owner, grew up in Los Angeles and learned the trade at LA Trade-Tech before spending nearly three decades working on HVAC systems across the South. He’s logged more service calls in the Kennesaw Avenue corridor near Marietta Square than he can count, and he knows the quirks of the older homes in that part of town as well as anyone. Devin built his reputation on straight-forward diagnostics: he tells you exactly what is broken, what it will cost to fix it, and what happens if you wait. “Tell me what it’s doing, and I’ll tell you what it needs – no guesswork, no upsell.”

We also service Carrier and Lennox, so if you have a mixed-brand house with a Trane furnace and a Carrier AC, one tech can handle both. For the homeowner opening the door to a stranger, knowing exactly who’s arriving, with a badge proving it, changes the entire experience. That’s the standard we operate under, every visit, every time.

FAQs